WikiStart: PrusaSlicer_Anycubic_4Max_Pro.ini

File PrusaSlicer_Anycubic_4Max_Pro.ini, 7.2 KB (added by dsl, 4 months ago)

A PrusaSlicer? 2.0.0 configuration file for Anycubic 4Mac Pro 3D printer

Line 
1# generated by PrusaSlicer 2.0.0+ on 2019-12-18 at 14:41:37
2avoid_crossing_perimeters = 0
3bed_shape = 0x0,205x0,205x205,0x205
4bed_temperature = 55
5before_layer_gcode = 
6between_objects_gcode = 
7bottom_fill_pattern = concentric
8bottom_solid_layers = 3
9bridge_acceleration = 0
10bridge_angle = 0
11bridge_fan_speed = 100
12bridge_flow_ratio = 1
13bridge_speed = 60
14brim_width = 0
15clip_multipart_objects = 0
16colorprint_heights = 
17compatible_printers_condition_cummulative = ;"! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)"
18complete_objects = 0
19cooling = 1
20cooling_tube_length = 5
21cooling_tube_retraction = 91.5
22default_acceleration = 0
23default_filament_profile = ""
24default_print_profile = 
25deretract_speed = 0
26disable_fan_first_layers = 1
27dont_support_bridges = 1
28duplicate_distance = 6
29elefant_foot_compensation = 0
30end_filament_gcode = "; Filament-specific end gcode"
31end_gcode = M104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors\nM107\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 ;X-20 Y-20 F[travel_speed] ;move Z up a bit and retract filament even more\nG28 X0 ;Y0 ;move X/Y to min endstops, so the head is out of the way\nG1 Y180 F2000\nM84 ;steppers off\nG90\nM300 P300 S4000
32ensure_vertical_shell_thickness = 0
33external_perimeter_extrusion_width = 0.4
34external_perimeter_speed = 50%
35external_perimeters_first = 0
36extra_loading_move = -2
37extra_perimeters = 1
38extruder_clearance_height = 20
39extruder_clearance_radius = 20
40extruder_colour = ""
41extruder_offset = 0x0
42extrusion_axis = E
43extrusion_multiplier = 1
44extrusion_width = 0.4
45fan_always_on = 1
46fan_below_layer_time = 100
47filament_colour = #FF3232
48filament_cooling_final_speed = 3.4
49filament_cooling_initial_speed = 2.2
50filament_cooling_moves = 4
51filament_cost = 25.4
52filament_density = 1.24
53filament_diameter = 1.75
54filament_load_time = 0
55filament_loading_speed = 28
56filament_loading_speed_start = 3
57filament_max_volumetric_speed = 15
58filament_minimal_purge_on_wipe_tower = 15
59filament_notes = "List of materials tested with standard PLA print settings:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladec PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
60filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
61filament_settings_id = "Devil Design PLA"
62filament_soluble = 0
63filament_toolchange_delay = 0
64filament_type = PLA
65filament_unload_time = 0
66filament_unloading_speed = 90
67filament_unloading_speed_start = 100
68fill_angle = 45
69fill_density = 10%
70fill_pattern = rectilinear
71first_layer_acceleration = 0
72first_layer_bed_temperature = 55
73first_layer_extrusion_width = 0.4
74first_layer_height = 0.2
75first_layer_speed = 30
76first_layer_temperature = 210
77gap_fill_speed = 20
78gcode_comments = 0
79gcode_flavor = marlin
80gcode_label_objects = 0
81high_current_on_filament_swap = 0
82host_type = octoprint
83infill_acceleration = 0
84infill_every_layers = 1
85infill_extruder = 1
86infill_extrusion_width = 0.4
87infill_first = 0
88infill_only_where_needed = 0
89infill_overlap = 25%
90infill_speed = 80
91inherits_cummulative = ;"Generic PLA";
92interface_shells = 0
93layer_gcode = 
94layer_height = 0.08
95machine_max_acceleration_e = 10000,5000
96machine_max_acceleration_extruding = 1500,1250
97machine_max_acceleration_retracting = 1500,1250
98machine_max_acceleration_x = 9000,1000
99machine_max_acceleration_y = 9000,1000
100machine_max_acceleration_z = 500,200
101machine_max_feedrate_e = 120,120
102machine_max_feedrate_x = 500,200
103machine_max_feedrate_y = 500,200
104machine_max_feedrate_z = 12,12
105machine_max_jerk_e = 2.5,2.5
106machine_max_jerk_x = 10,10
107machine_max_jerk_y = 10,10
108machine_max_jerk_z = 0.2,0.4
109machine_min_extruding_rate = 0,0
110machine_min_travel_rate = 0,0
111max_fan_speed = 100
112max_layer_height = 0
113max_print_height = 270
114max_print_speed = 80
115max_volumetric_speed = 0
116min_fan_speed = 100
117min_layer_height = 0.07
118min_print_speed = 15
119min_skirt_length = 0
120notes = 
121nozzle_diameter = 0.4
122only_retract_when_crossing_perimeters = 1
123ooze_prevention = 0
124output_filename_format = [input_filename_base].gcode
125overhangs = 1
126parking_pos_retraction = 92
127perimeter_acceleration = 0
128perimeter_extruder = 1
129perimeter_extrusion_width = 0.4
130perimeter_speed = 60
131perimeters = 3
132post_process = 
133print_host = 
134print_settings_id = model_sup
135printer_model = 
136printer_notes = 
137printer_settings_id = Anycubic 4Max Pro
138printer_technology = FFF
139printer_variant = 
140printer_vendor = 
141printhost_apikey = 
142printhost_cafile = 
143raft_layers = 0
144remaining_times = 0
145resolution = 0
146retract_before_travel = 2
147retract_before_wipe = 0%
148retract_layer_change = 0
149retract_length = 2
150retract_length_toolchange = 10
151retract_lift = 0
152retract_lift_above = 0
153retract_lift_below = 0
154retract_restart_extra = 0
155retract_restart_extra_toolchange = 0
156retract_speed = 40
157seam_position = aligned
158serial_port = 
159serial_speed = 250000
160silent_mode = 1
161single_extruder_multi_material = 0
162single_extruder_multi_material_priming = 1
163skirt_distance = 6
164skirt_height = 1
165skirts = 8
166slice_closing_radius = 0.049
167slowdown_below_layer_time = 20
168small_perimeter_speed = 15
169solid_infill_below_area = 70
170solid_infill_every_layers = 0
171solid_infill_extruder = 1
172solid_infill_extrusion_width = 0.4
173solid_infill_speed = 20
174spiral_vase = 0
175standby_temperature_delta = -5
176start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}18{else}30{endif} ; Filament gcode"
177start_gcode = G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F[travel_speed] ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F[travel_speed]\nM117 Printing...\nG5
178support_material = 0
179support_material_angle = 0
180support_material_auto = 1
181support_material_buildplate_only = 1
182support_material_contact_distance = 0.2
183support_material_enforce_layers = 0
184support_material_extruder = 1
185support_material_extrusion_width = 0.35
186support_material_interface_contact_loops = 0
187support_material_interface_extruder = 1
188support_material_interface_layers = 3
189support_material_interface_spacing = 0
190support_material_interface_speed = 100%
191support_material_pattern = rectilinear
192support_material_spacing = 2.5
193support_material_speed = 60
194support_material_synchronize_layers = 0
195support_material_threshold = 0
196support_material_with_sheath = 1
197support_material_xy_spacing = 50%
198temperature = 205
199thin_walls = 1
200threads = 4
201toolchange_gcode = 
202top_fill_pattern = concentric
203top_infill_extrusion_width = 0.4
204top_solid_infill_speed = 15
205top_solid_layers = 3
206travel_speed = 130
207use_firmware_retraction = 0
208use_relative_e_distances = 0
209use_volumetric_e = 0
210variable_layer_height = 1
211wipe = 0
212wipe_into_infill = 0
213wipe_into_objects = 0
214wipe_tower = 0
215wipe_tower_bridging = 10
216wipe_tower_rotation_angle = 0
217wipe_tower_width = 60
218wipe_tower_x = 180
219wipe_tower_y = 140
220wiping_volumes_extruders = 70,70
221wiping_volumes_matrix = 0
222xy_size_compensation = 0
223z_offset = 0