Changes between Version 44 and Version 45 of WikiStart


Ignore:
Timestamp:
Sep 25, 2018, 11:57:25 AM (11 months ago)
Author:
dsl
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • WikiStart

    v44 v45  
    11=== Overview ===
    22
    3  MCUSim is a digital simulator of the 8-bit AVR microcontrollers. It is
    4  written from scratch to assist in circuit simulation, firmware debugging,
    5  testing, and signal tracing.
     3MCUSim is a digital simulator of the 8-bit AVR microcontrollers. It is
     4written from scratch to assist in circuit simulation, firmware debugging,
     5testing, and signal tracing.
    66
    7  Simulator can be extended by creating models written in Lua. They may affect
    8  state of a simulated MCU in several ways, e.g. access internal registers,
    9  generate signals on its pins or terminate the whole simulation, and play
    10  roles of the significant parts of a circuit connected to the microcontroller
    11  (external EEPROM, humidity sensor, MOSFET switch).
     7Simulator can be extended by creating models written in Lua. They may affect
     8state of a simulated MCU in several ways, e.g. access internal registers,
     9generate signals on its pins or terminate the whole simulation, and play
     10roles of the significant parts of a circuit connected to the microcontroller
     11(external EEPROM, humidity sensor, MOSFET switch).
    1212
    13  There is an interactive script also to prepare a simulated MCU instance
    14  which is installed together with the simulator executable. It is particularly
    15  helpful to set up microcontroller for a firmware debugging (via remote GDB
    16  target at localhost:12750) or create a firmware test with Lua models to check
    17  conditions and parameters.
     13There is an interactive script also to prepare a simulated MCU instance
     14which is installed together with the simulator executable. It is particularly
     15helpful to set up microcontroller for a firmware debugging (via remote GDB
     16target at localhost:12750) or create a firmware test with Lua models to check
     17conditions and parameters.
    1818
    19  Registers of a simulated MCU can be saved into a VCD (value change dump)
    20  file and read using [http://gtkwave.sourceforge.net GTKWave] viewer.
     19Registers of a simulated MCU can be saved into a VCD (value change dump)
     20file and read using [http://gtkwave.sourceforge.net GTKWave] viewer.
    2121
    2222=== Release version ===